Contact UsQuick Quote
240 GPM General Fluid Transfer Pump – Tri-Rotor Model 200A
Click image to enlarge
Tri-Rotor Pump model 200A, which shares common components with model 220T, is in the largest family of Tri-Rotor solid head pumps that provide constant flow rates. This heavy duty pump is perfect for simple fluid transfer such as loading and unloading drums, totes, tanks, and trailers. The pump serves a wide range of industrial markets and applications. Examples of the 200A model’s diverse applications include pumping bentonite clay slurry, latex paint, lime slurry, ink pigment, coal tar, polyester resin, brine, barium sulphate slurry, phenol formaldehyde resin, and petroleum residual.
The pump is designed with side suction and top discharge flanged ports and is available in both clockwise (CW) and counterclockwise (CCW) rotations for pump installation flexibility. Materials of construction for the 200A model include Iron Fitted, All Iron, Bronze Fitted, or All Bronze configurations. Two drain plugs, located on the shaft housing, are provided with every pump.
The pump is designed with side suction and top discharge flanged ports and is available in both clockwise (CW) and counterclockwise (CCW) rotations for pump installation flexibility. Materials of construction for the 200A model include Iron Fitted, All Iron, Bronze Fitted, or All Bronze configurations. Two drain plugs, located on the shaft housing, are provided with every pump.
Specifications of the Tri-Rotor Solid Head Pump Model 200A:
- Flow rate: 58 to 240 GPM
- Viscosity range: 4 to 21,625 cPs (40 to 100,000 SSU)
- Inlet and Discharge Port size: 4” Flanged Ports
- Operating temperature range: -40 °F to 650 °F
- Maximum operating pressure: 125 PSI
- Pump displacement per revolution: 0.465 gal/rev
- Pump speed range: 125 to 520 RPM
- Solids passage available: 0.069 in.
Configure Your 200A Solid Head Pump
Part Number:
200A
Quantity:
Technical Information
Accessories
Please add a quantity to the following accessories before clicking the "Add to Quote Cart" button above to add items to your quote.
As with all Tri-Rotor pump models, the 200A is available with a Steam Jacketed option for fluids requiring to be heated or cooled in order to be pumped. Tri-Rotor also offers an interesting option for its’ 200A solid head design: a Reduced Stroke Pump Head. With this option, the pump can be designed to target a specific flow rate at a percentage of full flow.
Other Options for the Solid Head Pump Model 200A:
- Other Materials of Construction options:
- Shaft: Steel (std.), Stainless Steel, or Hardened Stainless Steel
- Piston: Iron (std.), Bronze, or Steel
- Body Gasket options:
- Standard {to 250 °F (121 °C)}
- Heat Resistant {to 650 °F (345 °C)}
- Shaft length: “M” (21”) (std.), “T” (21”), “MO” (21”), or “BD” (21”)
- Shaft seal and lubrication:
- Packing options (grease fitting provided):
- Teflon Impregnated Packing (std.) {to 550 °F (288 °C)}
- FDA Food Grade (PTFE) Packing {to 500 °F (260 °C)}
- Heat Packing {to 650 °F (345 °C)}
- Zero-Leak #3 (Beaded) Packing {-40 °F to 500 °F (-40 °C to 260 °C)}
- Zero-Leak #30 (Non-Beaded) Packing {-40 °F to 500 °F (-40 °C to 260 °C)}
- Mechanical seal options (oil cup provided):
- Type 1 Mechanical Seal – Viton {-40 °F to 300 °F (-40 °C to 150 °C)}
- Type 1 Mechanical Seal – Buna {10 °F to 180 °F (-10 °C to 80 °C)}
- Packing options (grease fitting provided):
- Shuttle design: Formed shuttle only
- Relieved Rotor Group (for higher viscosities: >10,000 SSU/2,150 cPs)
- Sanitary Preparation of pump internal components for food applications
- Grease feeder available for shaft lubrication on pumps with packing
- Exterior Protection: Orange Paint (std.), Black Paint, White Lacquer, or 316SS Epoxy Coating
The bare weight of the pump is approximately 260 lbs. The estimated shipping weight is 330 lbs.
Besides offering just a bare pump only for the Model 200A, Tri-Rotor offers a complete mounted pump system, including motor drive assembly and mounting. Replacement parts for all Series 200 pumps can be found here.